Merchandise Description

Lugong flood and drought rotary tiller, paddy discipline tiller, garden tiller.

1. The body is produced of thickened metal plate, which is strong and durable, efficiently lowering the vibration produced by the engine and prolonging the life of the equipment
two. The engine adopts a four-cylinder 490 Changchai motor, which is entire of electricity and reduced fuel usage
3. The special gearbox for crawler is shaped in 1 piece, and the rear electrical power output and the going for walks box are in the identical gearbox, so that the going for walks and the rear electricity output are more coordinated.
tune. The unilateral electricity reduce-off steering can flip 360° on the location, making the turning and steering much more adaptable. There are dual brake programs to make the braking impact
Greater fruit. There are 4 forward gears and 1 reverse gear, respectively with high and lower gears, a whole of 10 gears. Rear energy output factors are substantial and low
Gear, 720 rpm at large velocity and 540 rpm at reduced pace.
four. There are sturdy stress cylinders at the entrance and back again, which can comprehend sturdy lifting and strong falling, and the procedure is far more steady
five. The unique crawler for paddy fields is adopted, which has a large adhesion spot, powerful gripping ability, no slippage, no idling, and increases work performance. The crawler is thickened and widened to 35
cm, the entire machine weighs only 1.5 tons. The lightweight entire body, large chassis and broad crawler can actually comprehend the dual use of water and drought, and the car will not get trapped in the mud.
six. The chassis reinforcement price is as high as 37 cm to increase the passing overall performance of the equipment
7. The single side adopts the design of setting up 1 driving wheel, 6 supporting wheels, 2 best wheels, and 1 tensioning wheel, and making use of 6 supporting wheels can properly
The fat of the device is dispersed to every wheel, thereby decreasing the bodyweight of the wheel and generating the wheel a lot more durable and dress in-resistant
eight. The turning of the machine adopts unilateral hydraulic reduce-off energy, which decreases the put on on the brake (disc and pad) and prolongs the service lifestyle
nine. The sheet steel elements of the device are created of thickened steel plates earlier mentioned T4, which are powerful and sturdy, not effortless to deform, and the paint colour is manufactured of high-quality spray powder, which has very good adhesion
Huge and temperature resistant.
ten. The rear-mounted suspension (with suspension) is suitable with all wheeled tractors and agricultural machinery
eleven. The hydraulic method of this motor vehicle is hydraulic transmission oil, which is resistant to higher temperature and is equipped with an 80-mesh filter, which can successfully filter iron filings and impurities in the transmission oil. Refill fluid
The pressure oil radiator reduces the temperature of the transmission oil during use to stay away from injury to the gearbox and handle failure
12. Install a water tank radiator to boost the water tank ability, which can properly lessen the large temperature generated by the engine throughout use
thirteen. The air filter is a dry filter, which can filter a massive sum of dust and mud. After every single perform, clean the air filter and blow the dust inside
14. The diesel tank has a big capacity and a long battery daily life
fifteen. It is suitable for little and medium-sized paddy fields, swamps, muddy fields, biased fields and other severe environments. It is particularly appropriate for modest and medium-sized farmers and growers.Launch the labor power and drastically improve the procedure performance
1. With a fifty-horsepower engine, a fifty-horsepower Changchai motor is optional. The patented solution of variable pace gearbox, reliable overall performance, there are 4 ahead gears
1 equipment with high and minimal velocity, 1 reverse gear with high and low pace, a overall of 8 forward gears, with neutral and reverse. The rear output of the gearbox has 2 gears
Pace, lower velocity 540 rpm, substantial pace 720 rpm.
two. The steering of the device adopts hydraulic pressured unilateral brake steering, and the steering procedure has its possess lower-off electricity, which can effectively protect the gearbox and braking system and make it
Much more sturdy. The machine has rear output, suspension and robust lift, and can be matched with wheeled tractor implements. An optional bulldozer blade can be set up in entrance of the fuselage.
As nicely as the loader bucket, it genuinely realizes a multi-goal device, and the agricultural engineering is appropriate.
3. The layout of the belt tractor has better adaptability than the wheeled variety, the chassis is reduced, the balance is great, and the crawler adhesion coefficient is large, which can properly resist tilting and
Downhill slope. The crawler rotary tiller is an all-terrain operation equipment, which has the mobility of turning and steering in location, and has more robust climbing and off-highway overall performance.

   ZheJiang LuGong Machinery Co., Ltd was launched in March 2000 which situated at the junction of 3 towns(HangZhou, HangZhou and HangZhou)-HangZhou HangZhou industrial trade park and it’s the spine business of design equipment countrywide vast with fixed asset 500million Yuan. It covers a land of two hundred thousand sq. meters and has 1,a hundred employees, 88 of whom are engineers and professionals.
Our business largely creates loaders, excavators, tippers, tricycles etc. Items are mainly offered to over twenty provinces in China and exported to dozens of international locations and regions in Africa, Southeast Asia, South The usa and Russia. The quality and performance of our modest farm-use loaders and building tippers are in foremost placement of the market during the country and properly gained by users. Now, “Lu Gong” brand name loaders and tipper have gained acceptance by sellers and makes use of all in excess of China.
We concentrate on good quality, overall performance and take into account of customers as usually. In management, we’ve achieved a new degree by adopting ISO9001:2015 intercontinental high quality management technique.
We would like to produce in financial development by keeping our old and new pals and consumers arms by pursuing our organization philosophy of “Pushed by science and technological innovation, searching for survival by top quality, benefiting by managing and profitable marketplace by support” and spirit of “Pioneering, innovating and pursuing excellence”.

###

###

Safety Precautions For a PTO Shaft

When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.

Safety precautions

One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.

Types of pto shafts

PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.

Reaction time

It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.

Standardization

The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.

Safety chains

The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.

Shield

The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.

editor by czh 2022-12-29